Graph-Lite is a 10H coating that lasts 1.5-2 years with one coat. It can be layered to last longer as well.
Made right here in the USA!
Insane depth, shine and protection. More resistant to water spots than traditional ceramic coatings. Creates a slicker, smoother surface feel then ceramics. Tighter water beads and better water shedding.
Compared to more traditional ceramic coatings, our newest coating is a partially reduced graphene-oxide modified ceramic coating variant, and it will be found to have some improved characteristics:
Higher Resin Loading Level: elevated resin loading compared to similar strictly quartz-based coatings due to the increased ease of use allowing this.
Less Prone to Water Spotting: less penetration of the contaminants into the coating matrix.
Lower Sliding Angle: water evacuates at angles less than 10-15° of tilt over traditionally 20° and higher! This presents itself as a highly dynamic hydrophobicity, compared to the more traditional static hydrophobicity of strictly quartz-based coatings.
Higher Contact Angle: bead angles averaging 110-115° or more on almost any substrate applied.
Higher Stain Resistance: bugs, saps, droppings, fallout, etc.
Higher Scratch/Mar Resistance: the added graphene-oxide imparts additional tensile strength to boost hardness.
Currently in the process of achieving a presumed >10H hardness certification from SGS International using the Mitsubishi Uni pencil lead.
Easier, Slicker, Glossier: higher open time and less chances for mistakes; flashes quickly and then sweats signaling time to wipe off – if it hazes this is too much dwell time and it has gone too far!
Lower Odor:more comfortable to apply compared to similarly high loading levels of resins in other ceramic coatings.
Universal Application:the graphene-oxide modified coating has nearly universal affinity for all substrates with a high level of adhesion and reactivity – no need to have a specific coating offered for a specific surface (i.e. trim, glass, paint, wheels).